This site uses cookies to bring you the best experience. Find out more
Skip to main content

Industrial Coating Solutions

Torishima delivers a wide range of surface preparation and industrial painting solutions, through our qualified specialists.  In the field of surface preparation, we use hand and mechanical techniques, including ultra high pressure water jetting, grit blasting and vapour blasting.

Torishima's National Association of Corrosion Engineers (NACE) certified coating inspectors have the capabilities to carry out specification review, fault finding and third party inspections.

Our focus is on the application of protective coating systems that provide excellent corrosion control, best value, whilst we minimise the risk to workers and the environment.

Specialist Systems for Surface and Moisture Tolerance

Torishima’s system is a wet & rust tolerant, two pack, high solids MIO - Zinc epoxy which can be utilised either as a one coat primer/finish with good UV resistance or as a high performance coating which can be over-coated with colour topcoats. It is compatible with many aged paint systems, including epoxies, acrylics and other single pack materials.

With these characteristics, Torishima can coat in almost all weather conditions and give our coating system a life expectancy of 15-20 years.

Surface Preparation

Typical methods of surface preparation include:

  • Grit
  • Hand preparation
  • Power tool preparation
  • Hydro-blasting (UP/UHP)
  • Abrasive blast cleaning (dry and wet)  
  • Vapour Blasting


Coating Application

Our wide ranging experience can be applied to the following specialist coating solutions.

  • Surface and moisture tolerant coating systems
  • One coat primer finish systems
  • Multi-component system applications
  • Conventional, airless, air-assisted airless, HVLP and plural pump spray applications
  • Screed & self levelling screeds
  • Tank & vessel linings
  • Non-slip coating systems for flooring


Coating Inspection

Torishima coating inspectors monitor all coating applications on-site and perform the all tests necessary to ensure the long-term performance of the coatings system. This includes on-site monitoring of atmospheric conditions, surface preparation, mixing and application of the coatings.

Our NACE certified coating inspectors have experience in all types of coating and lining applications.

Inspection services include:

  • Surveys and evaluation
  • Specification development
  • Material selection
  • Specification review
  • Technical support
  • Composite wraps and repair systems

Torishima Case Studies

Torishima Latest News